Louise D. Acton, 021

Modified on Mon, Nov 4 at 1:00 PM

Projectors

There is a Panasonic remote to turn the projectors on and off. It is stored on the podium.
Point the remote at the projector mounted on the ceiling and press power to turn the projector on.

Using the In-Room Computer

Press any key on the keyboard to wake up the computer (labelled with a 2).

Switch the display to use the in-room computer by pressing 2 on the Display Console.

The in-room computer is set up to play sound through the in-room speakers.

Adjust volume for the in-room computer from the Display Console (it is recommended that the needle be hitting red to be loud enough).

Please DO NOT turn off the in-room computer when you are finished your class.

Using the In-Room Microphone

There is a microphone on the podium. Turn it on and off with the power switch on the top of the unit.

The microphone is set up to play through the in-room speakers.

Move the microphone closer to your mouth if you need sound in the room to be louder.

Please remember to charge the microphone battery at the end of your session. The charger is on the shelf to the right of the podium.

Using the In-Room Camera

Switch the display to use the in-room camera by pressing 3 on the Display Console.

Connect to Teams (using in-room computer)

The in-room computer is signed into Teams under account [email protected].

Connect to Zoom (using in-room computer)

The in-room computer is signed into Zoom under account [email protected].

Connect Your Own Laptop

Connect your laptop to the AV system using the HDMI cable labelled 1 on the desk.

Turn on the in-room screens by holding down the ON button on the Display Console for 3 seconds.

Send what you see on your laptop to the screens on both sides of the room by pressing the ‘1’ button on the Display Console.

If you need to play audio from your laptop, ensure that your laptop is sending sound to PT-EX620 speakers.

To adjust the volume, use the volume control on the display console.

Ending Class

When class concludes, please turn the Display Console off using the Off button.